Scalable 1080p Encoder/ RF Modulator
For organizations looking for cost-effective HD encoding the HDBridge 2600 Series is the perfect fit. Choose from two or four channels models that allow you to deliver HD video up to 1080p resolution to an unlimited number of displays over almost any distance.
The HDbridge 2600 series converts high definition AV sources into an RF signal received a television's QAM (NA model) or DVB-T/C (EU model) digital tuner over coax cable. With its high 45 dBmv RF output, you can send your content to an unlimited number of displays over nearly any distance.
Multiple units can be combined to create a headend that supports over 100 channels on the RF network. This unit is designed primarily for high channel density environments where rapid deployment, advanced management, and compatibility are critical.
Up to 1080P resolution with closed captioning
The HDbridge2620 can distribute video in nearly any resolution from a VGA or Component source ranging from 640x480 all the way to 1920x1080.
The encoder will also support EIA/CEA-608 closed captions via the composite video input, ideal for sports bars with multiple displays.
Emergency Alert System
Add an extra layer of safety to your facility by using the built-in Emergency Alert System.
The ZeeVee Emergency Alert System (EAS) can tie systems into national or local alert systems. ZeeVee processes alerts sent with either EAS-NET or MPEG streaming. When an alert is active, all current audio and video will be interrupted and replaced with the alert.
LCD color front panel control
The HDbridge 2000 series has an easy to read LCD color front panel that makes it easy to setup and monitor your channels, check firmware, and identify IP addresses without a computer. The panel will show green, yellow, or red color bars on each channel to show the status of video and audio content being shown, as well enable easy adjustment of RF power and audio delay to ensure a perfect picture and sound on every screen.
Create your own custom channel with ZvShow
The HDbridge 2000 provides an extra channel to enable you to offer customized content on your displays in addition to your video source. This is in addition to the channels that are already included in each model.
ZvShow will play a video file (MP4, WMV, MOV) on a separate channel to enable you to use your displays to play commercials, display menus, or as digital signage. Simply change the channel on the display to select what content you want to see on your display.
Setting up your channels is a snap with Maestro
The ZeeVee Maestro software makes it simple to setup and manage your content and channels from anywhere on your network. Simply open your web browser and connect to the IP address on any ZvPro or HDBridge encoder and you can assign channel numbers, label your custom channels, and troubleshoot problems right from your desk or anywhere you have network access.
Directly control set-top boxes
The ZeeVee ZvSTB Control software enables you to manage your H25 DirecTV Reciever or other supported set-top box from directly from any computer through the Maestro software interface. Using an HDbridge or ZvPro, you can turn the receiver on or off, change channels, as well as edit the channel names appearing on the screen from any computer that you have network access.
