The wireless DA-700 Drive-Alert Vehicle Detection System is a kit that includes a DA-700CP Control Panel/Receiver and a DA-610TO Sensor/Transmitter.

The DA-700-611 is a kit that includes the DA-700CP and a DA-611TO Sensor/Transmitter in place of the standard DA-610TO.

The DA-700CP, DA-100CP, DA-610TO, DA-611TO and DA-612TO can also be purchased separately, and any number of each can be used together.

These systems detect vehicles approaching, or the movement of assets such as trailers, gates, construction equipment, tractors etc. and send a signal back to the control panel to provide an audible chime alert, as well as activate other equipment such as lights, signs, phone dialers or tie into and trigger other security panels.

Features of the DA-700:

• The DA-700CP Control Panel/Receiver has the built-in additional dry form C contacts we've had in previous models, PLUS:
  • +24V DC power source for 24VDC accessories, AND...
  • +12V DC power source for 12VDC accessories
  • TWO internal programmable timers - no need for a separate timer accessory for lights; they are built in!
  • Compatible with, and will interface with many security panels and systems
• The DA-700CP Control Panel/Receiver also has a built-in chime with volume-control and a choice of three different chime tones
• The DA-700 features ZONING for different audible-alerts up to three different areas (additional sensor/transmitters required)
• The DA-700 features ADDRESSING when you want your system to be on a different address than others that might be nearby
• Mute/Delay feature allows a user to program various times from 5 minutes to 1 hour to "Mute" the system with a push of a button. This feature is handy when someone leaves the home early in the morning and doesn't want to wake others, or if they are having a party and don't want the system to alert them with each vehicles arrival.
• Visible Power LED, Low Battery LED, Valid Signal Transmission from Sensor/Transmitter LED, as well as LEDs for the Mute function and each of the dry form C contacts
• Reception between the Sensor/Transmitters and the Control/Panel Receiver up to 1000 feet, or up to 8/10 of a mile when using the DA-660 Long-Range Reception Booster Antenna
• Ability to jump the signal to other DA-700CP or DA-100CP chimes up to 1000 feet, or 8/10 of a mile, to other locations or buildings when using the DA-REPEATER Wireless Signal Repeater accessory
• Ability to provide additional chimes in more locations in the home or other buildings via:
  • If longer distances are needed use our DA-REPEATER Wireless Signal Repeater with our DA-100CPS or additional DA-700CPs up to 1000 feet away, or up to 8/10 of a mile away if using the DA-660 Long-Range Reception Booster Antenna with them
  • If your customer wants additional hard-wired chimes instead of wireless, use the DA-655 Chime accessory
• Ability to activate lights when a vehicle of movement of assets are detected:
  • Tie in your hard-wired light controls directly into the DA-700CP Control Panel
  • Tie in our wireless DA-606LK or DA-606LK2 light kits

These DA-700s are backward compatible with previous generations of Mier accessories, sensor/transmitters, and control panels.