Product Overview
The Industrial Panel and DIN Rail AC UPS from APC by Schneider Electric offers protection from under voltage (sag) and over voltage (swell/surge), transients, spikes and unexpected power outages due to utility interruptions or problems within the facility.
The small form-factor is optimized for mounting within control panel enclosures either on a heavy-duty DIN rail or directly to the wall of the enclosure. The UPS battery can be loaded in the internal battery compartment or mounted externally depending on local codes. Frequently used to protect Industrial Process Control equipment, this AC UPS can provide protected AC power to multiple AC/DC power supplies within the cabinet.
General Information
Name : APC SUA500PDR-S Industrial Panel and DIN Rail UPS with Standard Battery 500VA 120V , APC by Schneider Electric
Category : UPS
UPC Code : 731304733010
Country of Origin : China. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : 2G-SUA50PDRS
Brand Name : APC by Schneider Electric
Manufacturer : Schneider Electric SA
Manufacturer Part Number : SUA500PDR-S
Product Name : Industrial Panel and DIN Rail UPS with Standard Battery 500VA 120V
Product Type : Line-interactive UPS
Weight (Approximate) (g) : 12836.664
Technical Information
Backup/Run Time (Full Load) : 8 Minute
Backup/Run Time (Full Load) (Second) : 480
Backup/Run Time (Half Load) : 24 Minute
Backup/Run Time (Half Load) (Second) : 1440
Number of Battery & Surge Outlets : 1
Output Voltage : 24V DC
Output Voltage (V AC) : 120
Receptacle Detail : 1 x Hard Wire 3-wire (H N + G)
Receptacle Type : Hard Wire 3-wire (H N + G)
Battery Information
Battery Characteristics : Maintenance-free, Sealed
Battery Chemistry : Lead Acid
Output Voltage (V DC) : 24
Typical Battery Recharge Time : 2.50 Hours
Typical Battery Recharge Time (Second) : 9000
Category Specific Attributes
Output Voltage (V) : 24
Surge Energy Rating (J) : 540
Interfaces/Ports
Serial Port : Yes
Physical Characteristics
Depth : 6.7"
Depth (mm) : 170.688
Form Factor : Tower
Height : 5.8"
Height (mm) : 148.336
Rack Height : 1U
Weight (Approximate) : 28.30 lb
Width : 14.2"
Width (mm) : 361.696
Power Description
Input Voltage : 110V AC
Input Voltage (V AC) : 110
Plug/Connector Type : Hard Wire 3 wire (1PH+N+G)
Surge Energy Rating : 540 J
Waveform Type : Sine Wave
Product Information
Load Capacity (VA) (W) : 500VA|325W
Load Capacity (W) : 500.000
Warranty
Limited Warranty : 2-year
Miscellaneous
Environmental Certification : REACH, ROHS
Environmentally Friendly : Yes
Package Contents : <li>Industrial Panel and DIN Rail UPS with Standard Battery 500VA 120V </li><li>CD with software</li><li>Documentation CD</li><li>Installation guide</li><li>Smart UPS signalling RS-232 cable</li>
