The SK-PULL-SA is a single action pull station requiring only one motion to activate the station. The SK-PULL-DA is a dual action pull station requiring two motions to active the station. The SK-PULL-SA and SK-PULL-DA are for use with Honeywell Silent Knight Series fire control panel (FACP).
Extremely easy to operate, the SK-PULL-DA and SK-PULL-SA provide a fast and practical means of manually initiating a fire alarm signal. The FACP recognizes each manual pull station by its specific address saving precious seconds in determining the location of an alarm.
The SK-PULL-SA and SK-PULL-DA can be surface mounted to an SB-I/O surface back box or semi-flush mounted on a standard single-gang with a minimum depth of 2.13"(5.40 cm) or double gang or 4" (10.61 cm) square electrical box. You can also use the optional (System Sensor® PN BG-TR) trim ring if the station is being semi-flush mounted.
FEATURES & BENEFITS
Installer can open station without causing an alarm condition
Dual-color LED is visible through handle of station blinks green to indicate normal operation and remains steady red in an alarm condition
Key operated test and reset lock using lock plate actuator
Key matches compatible FACP locks
Meets ADA requirement for 5 lbs maximum pull force to active
Meets the Americans with Disabilities Act Accessibility Guidelines (ADAAG) controls and operating mechanisms guidelines (Section 4.1.3)
Shell, door, and handle molded from durable LEXAN®
Reliable analog communications for trouble-free operation
Braille text on station handle
Rotary address switches for fast installation
Handle latches in down position and the word Activated appears, clearly indicating the station has been pulled
UL Listed, including UL 38, Standard of Manually Actuated Signaling System