PoE Testers
Filter Results
Showing 1 - 9 of 9
content loaded
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
ST-R240MIPVG0-STR20MIPV
Key Features
- One of the word's smallest OTDRs
- Distance accuracy verified by German test lab
- Pass/Fail report to TIA/ISO/IEC/IEEE
Sign In for Dealer Pricing
Sign In for Dealer Pricing
VI0019VG-VI0019
Key Features
- Provides an simple way to setup and focus POE powered IP cameras
- Maintains POE power to the IP camera while making a local Ethernet connection to a laptop to view the camera image
- Indicates PoE presence at the camera
Sign In for Dealer Pricing
Sign In for Dealer Pricing
TNC950ARTS-TNC950AR
Key Features
- Speed Certification to IEEE standards 802.3
- Cable testing to TIA 568A/B
- Active network testing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
TPS200CTS-TPS200C
Key Features
- Measures DC voltage from 3.5 to 56V, and power up to 280W; also tests up to 4-Pair PoE (IEEE 802.3bt Type 3)
- Easy-to-read, bright, scrolling OLED display
- Test PoE on active data cables without interrupting data flow
Sign In for Dealer Pricing
Sign In for Dealer Pricing
TPS100CTS-TPS100C
Key Features
- Go / No-Go PoE Voltage Detector
- End-span or Mid-span
- Bright LED indicators
Sign In for Dealer Pricing
Sign In for Dealer Pricing
POE2000IU-POE2000
Key Features
- LEDs indicate IEEE802.3af or 802.3at/bt standard
- Dual 7-digit LEDs indicate power source either end (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both for bt
- 2 Yellow LEDs indicate reversed polarity for power type
Sign In for Dealer Pricing
Sign In for Dealer Pricing
POE-1J0-POE1
Key Features
- Instantly verify the presence of PoE and determine the voltage, amperage, and standards of Ethernet cables, supporting Passive, 802.3af, 802.3at, and 802.3bt standards
- The tester can work without a battery, using the PoE to power the device
- Test the resistance and continuity of unpowered network cables using AA battery as the power source
Sign In for Dealer Pricing
Sign In for Dealer Pricing
TC-NT2TQ-TCNT2
Key Features
- ACCURATELY CHECK CABLES & PORTS: The comprehensive cable tester for network professionals allows you to accurately check pin configurations for Ethernet cables, USB cables (with TC-NTUF sold separately), BNC cables, and patch panel ports.
- CABLE TESTING DISTANCE: Tests over cables lengths of up to 300 meters (984 ft.)
- PIN TESTING: The network cable testers identifies proper, severed, short circuit, and cross connected pins.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
TC-NTP1TQ-TCNTP1
Key Features
- PORTS: This Inline PoE tester is equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PoE Device connection
- TESTING MODES: The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD
- USER FRIENDLY: The TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box; just plug-in to start testing
Sign In for Dealer Pricing
Sign In for Dealer Pricing