Product Overview
A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x2 in to the top slot of your rack and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8x2 is designed for applications where lights are not required.
M-8x2 Specifications:
- Maximum Output Current: 15 amps
- Line Cord: 6 ft. captive 14 AWG with 3-conductor plug
- Operating Voltage: 120VAC 60Hz
- Spike Protection Mode: Line to neutral
- Energy Dissipation: 170 joules
- Peak Impulse Current: 12000 amps
- Maximum Continuous Operating Voltage: 130 VAC RMS
- Let Through Voltage (@ 125 amps 8/20uS waveform) 400 volts
- Noise Attenuation: Transverse mode: Greater than 23dB 200Khz to 10 Mhz
- Dimensions: 1.75 H x 19 W x 3.75 D
- Weight: 4.9 lbs.
- Safety Agency Listing: cTUVus
- Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.
General Information
Name : Panamax M-8X2 Merit Series M-8x2 Power Conditioner , Panamax
Category : Power Conditioners - DEACTIVATED NODE
UPC Code : 654061028307
Country of Origin : China. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : ZG-M8X2
Brand Name : Panamax
Manufacturer : Panamax
Manufacturer Part Number : M-8X2
Product Name : Line Conditioner
Product Type : Line Conditioner
Weight (Approximate) (g) : 2222.603
Technical Information
Cord Length (mm) : 1828.8
Maximum Frequency (Hz) : 60
Receptacles Detail : 9
Category Specific Attributes
Surge Energy Rating (J) : 170
Physical Characteristics
Rack Height : 1U
Weight (Approximate) : 4.90 lb
Power Description
Cord Length : 6'
Input Voltage : 120V AC
Input Voltage (V AC) : 120
Maximum Frequency : 60 Hz
Surge Energy Rating : 170 J
Product Information
Mount Type : Rack Mount
Protection Type : AC Noise, Line to Neutral, Spike, Surge
